Author Topic: Pjs cz100 resto  (Read 17336 times)

Offline z50jai

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 126
  • my son on the cz100
Re: Pjs cz100 resto
« Reply #15 on: February 10, 2014, 02:28:11 PM »
Yes now that you mention it. It does look short I only checked that it had the 5deg kick in the frame but never measured the length. It has had a strength plate put on top of the Carby hole, Which I left for safety.
Any one got any frame measurements I can check it with?
Monkey on, Monkey nuts!!!

Offline S2tpw

  • Trade Count: (0)
  • Jr. Member
  • **
  • Posts: 73
Re: Pjs cz100 resto
« Reply #16 on: February 19, 2014, 07:58:37 PM »
PJ

I have to say the irony of waiting until your pride and joy was fully complete before raising the possibility of it being wrong raised a uncomfortable smile... A real no, really? moment.

As you know I'm not exactly in front of progress, so it means I have a complete frame still to measure from, my wife's need for a utility room refurb and looming job issues are finally to someone's benefit!

Please find 3 pictures (sorry for orientation!) that hopefully support your completion and again hopefully that you can measure with minimum disassembly. To be fair the element that looks questionable is the front mudguard proximity to the cylinder head.

A really useful measurement someone else could support you with would be between wheel hub centres front to back and easily done on a complete bike. Anyone?

Please let me know if I can help further

All the very best

Tim



« Last Edit: February 19, 2014, 08:23:17 PM by S2tpw »

Offline z50jai

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 126
  • my son on the cz100
Re: Pjs cz100 resto
« Reply #17 on: February 27, 2014, 10:45:29 PM »
Thanks for the pics/measurements I am in the process of fixing the frame now it had a 12deg bend in the frame. Will post some pics of repair once complete.
Monkey on, Monkey nuts!!!

Offline S2tpw

  • Trade Count: (0)
  • Jr. Member
  • **
  • Posts: 73
Re: Pjs cz100 resto
« Reply #18 on: March 01, 2014, 09:22:12 AM »
Glad you identified the problem. I guess you already had to straighten the forks, maybe this was damage done at the same time they got bent

Really sorry for the extra work. If you need any other angle or check measurements just PM me and I will do by return. Surprised no one has contributed hub to hub numbers, which would be a great post build check for all of us...

Offline z50jai

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 126
  • my son on the cz100
Re: Pjs cz100 resto
« Reply #19 on: March 01, 2014, 10:25:58 PM »
Yeah I sorted the forks out ok and the frame is now getting painted again.
That's all part of restoring and doing it right but with out this site the quality and correct look would be really hard to achieve. All the tip pics and opinions are golden. Also the parts contact have been awesome.
Monkey on, Monkey nuts!!!

Offline z50jai

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 126
  • my son on the cz100
Re: Pjs cz100 resto
« Reply #20 on: April 16, 2014, 10:18:11 AM »
Fresh paint . Finally done now time to refit again. After sorting out the 5deg bend issues the frame is now looking great.
« Last Edit: April 16, 2014, 10:21:15 AM by z50jai »
Monkey on, Monkey nuts!!!

Offline S2tpw

  • Trade Count: (0)
  • Jr. Member
  • **
  • Posts: 73
Re: Pjs cz100 resto
« Reply #21 on: April 17, 2014, 12:07:31 AM »
Looking good PJ...

Offline z50jai

  • Trade Count: (0)
  • Full Member
  • ***
  • Posts: 126
  • my son on the cz100
Re: Pjs cz100 resto
« Reply #22 on: May 03, 2014, 11:01:21 AM »
All back together. The kids love it. Just their size. Next to get it registered.
Monkey on, Monkey nuts!!!

Offline miniHM

  • Trade Count: (0)
  • Jr. Member
  • **
  • Posts: 20
Re: Pjs cz100 resto
« Reply #23 on: May 03, 2014, 02:13:58 PM »
congratulation !!!  cheer..

Offline miniHM

  • Trade Count: (0)
  • Jr. Member
  • **
  • Posts: 20
Re: Pjs cz100 resto
« Reply #24 on: May 03, 2014, 02:18:05 PM »
Thanks !!! ;) for S2tpw.

 

Powered by EzPortal