Author Topic: bullarabs Z50M resto bike #1  (Read 15717 times)

Offline bullarabs

  • Trade Count: (0)
  • Jr. Member
  • **
  • Posts: 14
bullarabs Z50M resto bike #1
« on: June 22, 2014, 01:00:45 PM »
M project that ive recently started. thought id share the build to try to liven up this forum.
this is what I started with
 

Offline bullarabs

  • Trade Count: (0)
  • Jr. Member
  • **
  • Posts: 14
Re: bullarabs Z50M resto bike #1
« Reply #1 on: June 22, 2014, 01:06:54 PM »
bikes been run into some thing as forks are bent back a bit and kink in frames back bone just behind front gusset.
straight edge shows bend in forks
 
here some one has attempted to apply heat and oxy weld braize it
 

Offline bullarabs

  • Trade Count: (0)
  • Jr. Member
  • **
  • Posts: 14
Re: bullarabs Z50M resto bike #1
« Reply #2 on: June 23, 2014, 03:21:34 AM »
I recently sent 3 Z50M frames off to be repaired,  2 are for me to restore and the 3rd is payment for frame repairs. anyway heres some updates of the  repairs to first M frame.
brass removed on back bone near front tank mount. shows damaged area from front impact.
 

next pic shows damaged piece cut out


then internal reinforcement piece welded in then piece over top.



finished off nicely.... well done to my friend from Sydney Blackattact for the repairs.

Offline bullarabs

  • Trade Count: (0)
  • Jr. Member
  • **
  • Posts: 14
Re: bullarabs Z50M resto bike #1
« Reply #3 on: June 23, 2014, 01:05:49 PM »
tail light bracket mount repair

 

Powered by EzPortal